| When do I need to change the Cutterpede® channel mat? |
|
|
When the Cutterpede® channel area is worn on the cutting mat, gently pull it out and turn it around -- or flip it over entirely to 2 new surfaces and reposition in place. There are actually four cutting positions on each channel mat.
|
|
| |
|
|
|
| What are Rub-Ons? |
|
|
Rub-Ons are made of a thin colorful material that has a slight stickiness on the back. Unlike regular stickers, they need to be applied with a stylus - you can also use the wooden craft stick provided in the package or the purchased Rub-On Tool. Available in a range of letter, word or alphabet styles, rub-ons are a great choice for adding a hand-created look to paper crafts. There are also some decorative design elements available as rub-ons too! Best of all, rub-ons provide a clean, neat appearance as there is no edge or "ring" that is often seen by a clear sticker.
|
|
| |
|
|
|
| What do I do if I make a mistake with Rub-Ons? |
|
|
Try the Adhesive Remover tool as it works for removing MOST styles of rub-ons. Always test this tool on a scrap piece first before trying to correct your final project piece. In the event that the mistake cannot be corrected, most crafters utilize the addition of another sticker to cover up or camouflage the error.
|
|
| |
|
|
|
| Can I use ink to color the staples? |
|
|
Yes and markers and ink will stay on the staple better when heated. It makes it more permanent and will not rub away or smudge as easy
|
|
| |
|
|
|
| I'm not having success cutting with my Cutterpede® . Any suggestions? |
|
Here are some helpful hints to a perfect cut:
• Place the Cutterpede® Trimmer on a non-slip surface to eliminate shifting.
• Make sure that the cutting arm is magnetically secure before cutting.
• Push the Blade Cartridge down while cutting to ensure clean cut through paper.
• When moving the extend-a-ruler, it is best to hold it above the "elbow" joint, taking care around the joint rather than stressing it further.
• For best results, always start with the shuttle at the top, then push down and pull toward self. The blade aligns itself along the side of the lift-up cutting arm.
• Always cut in the same direction for best results. If you are cutting through very thick stock and require two passes, return blade shuttle to starting position before making second pass.
|
|
| |
|
|
|
| How do I assemble and replace the blade shuttles on my Cutterpede® trimmer? |
|
|
To assemble the Cutterpede® , simply release lock at base and slide Blade Shuttle onto channel with the brass knob and blade at left side. (The white "Belly" of the shuttle fits around the clear track that runs from all along the lift-up cutting arm.) Flip lock back into secure position. You can check to make sure the shuttle is correctly installed by turning tool upside down; shuttle should remain in channel.
|
|
| |
|
|
|
| Are there replacement parts available for the Cutterpede® ? |
|
|
Yes. Replacement Blade Shuttles and Cutting Channel Mats are offered at many local craft stores, as well as some online retailers. We also now have perforating and scoring blade shuttles as well.
|
|
|
|
| Comment puis-je faire pour encrer mes papiers imprimés Gaïa ? |
|
|
de part leur pelliculage, vous ne pouvez pas embosser vos papiers mais vous avez la possibilité de les encrer en utilisant une encre de type Stazon.
|
|
|
|
| Je n'arrive pas à écrire sur les papiers imprimés Gaïa, quel produit puis-je utiliser ? |
|
|
vous pouvez utiliser tous les feutres ou stylos à encre permanente ou bien encore, les feutres d'écriture pour CD.
|
|
|
|
| je ne peux pas embosser mes estampes avec les encres Quatuor, Pourquoi ? |
|
|
Les encres Quatuor Gaïa sont des encres à séchage rapide c'est pour quoi vous ne pouvez embosser vos estampes.
|
|
|
|
| espace pro - Je n'ai pas accès à mon panier ? |
|
une fois enregistré, vous devez baisser le niveau de sécurité de votre explorateur : Outils, Options Internet, sécurité et ensuite, réitérer l'application avec l'onglet confidentialité.
Si ces actions n'étaient pas suffisantes, mettez-vous en contact avec le service informatique.
|
